• arcNETWORK : arcHELI - arcPLANE
    Results 1 to 4 of 4
    1. #1
      Join Date
      Mar 2008
      Location
      Weipa
      Club
      IMAC
      MAAA #
      54668
      Style
      Sport/Aerobatic
      Posts
      202

      Default YGE 120LV and Mini Vbar

      Hi Guys,

      I am wanting to run the internal Mini Vbar governor with my YGE 120LV in my Gobby 500. Do I need a phase sensor or do I just connect the orange slave wire from the YGE to the RXA port on the Mini Vbar? I just see some guys using a phase sensor with YGE's so I am a little confused.

      Cheers,

      Josh.

    2. #2
      Join Date
      Jul 2007
      Location
      Melbourne
      Club
      Freestyle Flyers
      MAAA #
      20872
      Style
      Sport/Aerobatic
      Posts
      6,757

      Default

      You need to make up the cable to get the phase output from the YGE if it is one of the later versions that have the phase sensor coming out the programming lead, you need to connect 2 of the outputs together along with getting the correct lead onto the right pin in the VBar.

      //Dennis.
      SOXOS DB7 : SOXOS 600 : SOXOS 550 : SOXOS F3C
      MSH Protos Max V2 800 : Protos 380 Evo : MSH Mini Protos FBL - stretch
      SAB Goblin 700 Nightflyer : Logo 600 Buddybox trainer
      CYE Stingray collective quad : and a handful of Blade Micros
      MAAA Instructor Blades : Jeti DS-16
      The arcSTAFF are here to help you.
      arcHELI Rules | Search is your friend | memberSERVICE | dropBOX

    3. #3
      Join Date
      Mar 2008
      Location
      Weipa
      Club
      IMAC
      MAAA #
      54668
      Style
      Sport/Aerobatic
      Posts
      202

      Default

      Thanks Dennis, I will research this some more. Thanks again.

      Josh.

    4. #4
      Join Date
      Mar 2008
      Location
      Weipa
      Club
      IMAC
      MAAA #
      54668
      Style
      Sport/Aerobatic
      Posts
      202

      Default

      I made the lead and it works a treat. Thanks Dennis.

      Josh.
      Last edited by rooster6; 23-01-2017 at 08:57 PM.

    5. The Following User Says Thank You to rooster6 For This Useful Post:

      Thunder Fighter (24-01-2017)

    Similar Threads

    1. YGE-120LV and Mini V-bar
      By WillKho in forum eTORQUE
      Replies: 8
      Last Post: 11-02-2015, 08:48 AM
    2. Will replacement Mini Vbar case fit Gaui Mini Vbar?
      By Grubscrew in forum flyBARLESS
      Replies: 7
      Last Post: 03-06-2013, 08:25 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •