• arcNETWORK : arcHELI - arcPLANE
    Page 3 of 3 FirstFirst 123
    Results 17 to 19 of 19
    1. #17
      Join Date
      Mar 2006
      Location
      western sydney
      MAAA #
      AUS 71301
      Style
      Sport/Aerobatic
      Posts
      2,039

      Default

      I tried some 3 blade props today and it has lost a lot of lift, I discovered if I turn all the basic gains down to 73% it will fly ok. If I put the naza in manual mode and do a climb it will climb out aggressively to one side not level.
      I was digging through the big box of bits I got with the quad and found another naza lite so I thought I would try that. I put it all together and it wouldn't connect to the lite software. I found its the lite case but it appears to have Naza M firmware on it. I have not set it up yet but I will give it a try.

    2. #18
      Join Date
      Aug 2008
      Location
      Nairne
      Club
      SARCH
      MAAA #
      71911
      Style
      Sport/Aerobatic
      Posts
      6,898

      Default

      Would the 3 bladed props have the same pitch as what the 2 bladed ones do? and maybe a silly question, do please ignore if it is.... are you speedies calibrated aswell and spin up at the same time?

      Cheers Dave.

      Sent from my F8331 using Tapatalk
      Compas 7HV, Stretched Synergy E5, Gaui X5 Formula, Turnigy, H550 Hex, Qav 250 racing Quad, Blade Nano QX, Blade Inductrix and a couple of 1/10 cars.

    3. #19
      Join Date
      Mar 2006
      Location
      western sydney
      MAAA #
      AUS 71301
      Style
      Sport/Aerobatic
      Posts
      2,039

      Default

      My two blade props are 8 x 4.5 and my three blade are 8 x 4. I have calibrated the speedies several times now. I hope to try the new flight controller tomorrow.

    4. The Following User Says Thank You to pete05 For This Useful Post:

      savage600 (04-05-2017)

    Similar Threads

    1. Naza Lite upgrade to Naza V2 for free!
      By demon1300 in forum multiCOPTERS
      Replies: 9
      Last Post: 24-12-2014, 06:51 PM

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •